ReactionBench logoReactionBenchREACTION TIME BENCHMARKS
Home/Tests/Double Click Test: Click Gap and Mouse Check

Double Click Test: Click Gap and Mouse Check

Find the shortest gap between two clicks, and check your mouse for double-click faults.

MEASURES
Gap ms
INPUT
Click
TIME
~30 sec
How the test works

Two presses, one gap, and a hardware check

Each attempt starts on your first press. The page stamps it with the browser's high-resolution clock, then waits up to 500 ms for the second press. The gap between the two is your result for that attempt. We read the press on pointer down, not on click, so the time you take to release the button never counts.

Your score is the median of the valid gaps from ten attempts. A single lucky or clumsy double click does not decide it. We also show your fastest gap.

A second press under 30 ms after the first is flagged as a possible mouse fault, also called switch chatter. These attempts are counted separately and left out of the score, so a faulty mouse cannot give you a fake fast result. A gap over 500 ms is a miss.

What is the average double click speed?

This page does not claim a population average, because we have no cited study of the gap between two clicks. What we can cite is the rule your computer uses. Windows counts two clicks as a double click when the second comes within 500 ms of the first, and Microsoft documents this default. The grade table below shows how our own bands read your median gap. A double click is a motor skill, not a reaction. For reaction figures that come from published research, read gamer reaction times.

Sources
  1. 01Microsoft Learn. GetDoubleClickTime function (winuser.h): the maximum time, in milliseconds, allowed between two clicks for them to count as a double click. The default is 500 ms. Microsoft Learn. GetDoubleClickTime function (winuser.h): the maximum time, in milliseconds, allowed between two clicks for them to count as a double click. The default is 500 ms.

What's a good double click speed?

A lower median gap means a faster double click. The table below places your median in a band, from relaxed to tight. Any gap under 500 ms is a working double click on a default Windows setup, so a bigger number is not a problem in daily use. Treat the bands as a guide for comparing your own runs on the same mouse. Clicking is a different skill from reaction, and what's a good reaction time explains how those scores are graded.

Relaxed
250 – 500 ms
Still inside the 500 ms Windows default window
Steady
140 – 250 ms
A comfortable, even double click
Quick
90 – 140 ms
Fast, clean presses with a short gap
Tight
30 – 90 ms
Very short gap. Gaps under 30 ms are flagged as a possible mouse fault

How to double click faster

A short, even gap comes from a relaxed finger and a mouse that suits your hand. These habits help most. If you also want a quicker reaction, read how to improve your reaction time.

  • Relax your finger. A tight hand slows the second press. Let the finger bounce on the button.
  • Press, do not stab. A light, short press is quicker to repeat than a hard one.
  • Rest your wrist. Keep your palm on the mouse and move only the finger.
  • Keep your rhythm. Aim for the same two beats every time. A steady gap gives a steady median.
  • Check the mouse first. A worn switch can give gaps under 30 ms that are not you. Fix the hardware before you chase a number.
  • Take breaks. If your finger aches, stop and rest. A comfortable result beats a painful one.

Double click faults and switch chatter

Here is how the page counts. Each of your ten attempts starts when you press. The page reads the press on pointer down, which fires the instant the button goes down. A second press must come within 500 ms, or the attempt is a miss. If the second press comes in time, the gap between the two stamps is your result for that attempt. Your score is the median of the valid gaps, and the fastest valid gap is shown next to it.

A double click fault means the mouse sends two clicks when you pressed once. The cause is usually a worn micro switch. Inside the button, a small metal contact makes the circuit. When it wears, the contact bounces and the circuit closes twice in a few milliseconds. The computer sees two presses.

A human finger cannot release and press a button again in under about 30 ms. So this page flags any second press under 30 ms as a possible fault. It counts these attempts on their own and keeps them out of your score. This also stops a chattering mouse from producing a fake fast result. The flag is a hint. If you see two or more, repeat the test and then try the mouse on another computer.

Gaps over 500 ms are misses. They match the default Windows window, so a slower pair of clicks would not register as a double click in most programs. You can raise the window in your mouse settings.

To fix a real fault, clean the mouse and try another cable or USB port first. If the problem stays, the switch is worn. Replace the switch, use the warranty, or buy a new mouse. For more on how click speed relates to reaction, see our gamer reaction times article.

Questions

Frequently asked questions

What is a double click test?
It measures the gap between your two presses. You double click ten times. The page times each gap in milliseconds from the moment each press lands, and your score is the median gap.
What is a good double click speed?
There is no cited population average for this gap, so we only describe bands. A gap under 90 ms is tight, 90 to 140 ms is quick, and 140 to 250 ms is a steady pace. Most operating systems only treat two clicks as a double click inside a set window, so a slower gap still works for daily use.
How long is the Windows double-click window?
Windows treats two clicks as a double click if the second comes within 500 ms of the first by default. Microsoft documents this value, and you can change it in the mouse settings. This test uses the same 500 ms limit. A longer gap counts as a miss.
Why does my mouse double click by itself?
Usually the cause is a worn micro switch. The switch contacts bounce, so one press registers twice a few milliseconds apart. This is called switch chatter or a double-click fault. Dust and a damaged cable can add to it.
How does the test spot a faulty mouse?
A second press under 30 ms after the first is physically very unlikely for a human finger. The page flags it as a possible fault and shows it in amber. It keeps these attempts out of your score. It is a hint, not a diagnosis.
Why are some attempts not counted?
Two kinds of attempts are left out. A fault is a gap under 30 ms. A miss is a gap over 500 ms, or a single press with no second one. Both still use up an attempt, so you always get ten. If all ten are left out, the page records no score.
How can I fix a double clicking mouse?
Try a different USB port and a clean cable, then check the mouse on another computer. If it still chatters, the switch is worn. You can replace the switch, use the warranty, or buy a new mouse. Lowering the double-click speed in settings does not fix the hardware.
Does a fast double click mean fast reactions?
No. This test measures how fast your finger repeats a press, which is motor tempo. It does not time your response to a signal. For that, try the classic reaction time test.